Speakman SE-4300 Portable Eyewash is a gravity-fed emergency eyewash designed to provide accessible flushing water in workplaces where a permanently plumbed emergency eyewash may not be practical. The GravityFlo SE-4300 features a 20-gallon high-density molded polyethylene tank, pull-strap activation and an included drench hose for additional spot body washing.

The Speakman GravityFlo Eyewash provides continuous flow at approximately 0.4 GPM and is designed to operate for more than the ANSI/ISEA Z358.1 required 15-minute period. Speakman identifies the SE-4300 as an ANSI/ISEA Z358.1 certified portable eyewash. :contentReference[oaicite:0]{index=0}

Key Features

• Speakman SE-4300 Portable Eyewash
• Gravity-fed emergency eyewash
• 20-gallon high-density molded polyethylene tank
• Included drench hose for spot body washing
• Pull elastomeric strap activation
• Approximately 0.4 GPM flow rate
• Continuous flow for 15+ minutes
• Molded plastic spray outlets
• Self-cleaning nozzles
• Plastic fill cap with tamper prevention
• Shelf or wall-mountable design
• Wall mounting bracket included
• Integral eyewash sign included
• Designed for industrial safety applications
• ANSI/ISEA Z358.1 certified

Portable Emergency Eyewash

The SE-4300 Eyewash is designed for workplaces that require emergency eye-flushing equipment without relying on a permanent plumbing connection. Its portable GravityFlo design allows the unit to be positioned where emergency eyewash access is needed.

Speakman describes GravityFlo units as portable emergency eyewashes intended for applications where placing an eyewash close to a hazardous location is important. This makes the SE-4300 suitable for consideration in industrial and other work environments where hazardous substances may present an eye or body exposure risk. :contentReference[oaicite:1]{index=1}

20-Gallon Capacity

The Speakman SE-4300 Portable Eyewash uses a 20-gallon high-density molded polyethylene tank. The tank stores the flushing solution required for emergency eyewash operation and allows the unit to function without a direct water supply connection.

The large tank capacity is one of the main features of this GravityFlo model. Speakman’s current product information specifies a 20-gallon tank and continuous operation exceeding the 15-minute period required by ANSI/ISEA Z358.1. :contentReference[oaicite:2]{index=2}

Gravity-Fed Operation

The GravityFlo SE-4300 uses gravity rather than a permanent pressurized plumbing connection to deliver flushing water to the spray outlets. This makes the unit useful in locations where conventional plumbed emergency eyewash installation is difficult or unavailable.

The gravity-fed design provides a straightforward operating system. Once activated, the stored flushing fluid flows through the eyewash outlets at the specified rate.

Pull-Strap Activation

The SE-4300 Eyewash uses an elastomeric pull strap for activation. Pulling the strap starts the eyewash flow and allows the user to operate the unit without needing to hold a control continuously.

This hands-free arrangement can be particularly useful during an emergency because the user may need both hands to position the face and eyes correctly in front of the flushing outlets.

Emergency Eye Flushing

The primary function of the Speakman Portable Eyewash is emergency eye flushing. When a hazardous substance enters the eyes, immediate flushing is an important part of emergency response procedures.

The SE-4300 provides a continuous flow of flushing fluid through its spray outlets. Users should follow their workplace emergency procedures and seek appropriate medical attention after an exposure.

Included Drench Hose

The Speakman SE-4300 Portable Eyewash includes a drench hose that provides an additional option for spot body washing. This feature extends the usefulness of the unit beyond eye flushing when a localized body exposure requires additional flushing.

The drench hose connects through the unit’s side outlet. Speakman’s documentation identifies the side connection as a fitting used for attaching the included SE-4920 drench hose and for draining and cleaning the unit. :contentReference[oaicite:3]{index=3}

Spot Body Washing

The Portable Eyewash with Drench Hose can be useful when a worker needs localized flushing of an affected area. The drench hose allows water to be directed toward a specific area of the body rather than relying only on the eyewash spray outlets.

The drench hose is intended for spot body washing and should not be confused with a full emergency safety shower. The exact emergency equipment required should be determined through a workplace hazard assessment.

0.4 GPM Flow Rate

The SE-4300 Eyewash has a documented flow rate of approximately 0.4 gallons per minute, equivalent to about 1.51 litres per minute, at the specified test condition. Speakman’s product documentation identifies this flow rate for the SE-4300. :contentReference[oaicite:4]{index=4}

The continuous flow is designed to provide flushing for more than the 15-minute period associated with the ANSI/ISEA Z358.1 requirement for emergency eyewash equipment. :contentReference[oaicite:5]{index=5}

Self-Cleaning Spray Nozzles

The Speakman GravityFlo Eyewash incorporates spray outlets designed for emergency eye flushing. Speakman’s current product specifications identify self-cleaning nozzles as a feature of the SE-4300. :contentReference[oaicite:6]{index=6}

The spray outlets should be inspected regularly and kept in suitable condition according to the manufacturer’s maintenance instructions.

Wall or Shelf Mounting

The Speakman SE-4300 Portable Eyewash can be positioned for convenient access and is designed to be shelf or wall mounted. A wall mounting bracket is included with the documented configuration. :contentReference[oaicite:7]{index=7}

Installing or positioning an emergency eyewash in an accessible location is important because workers need to reach the equipment quickly during an exposure incident.

Integral Eyewash Sign

The SE-4300 Eyewash includes an integral eyewash sign. Clear identification helps workers locate emergency flushing equipment when immediate access is required.

The eyewash should be positioned in a clearly accessible location and should not be obstructed by stored materials, equipment or other workplace objects.

Tamper-Prevention Fill Cap

The Speakman Portable Eyewash features a plastic fill cap with integral tamper prevention. The fill cap helps secure the tank while providing access for filling and maintaining the unit according to the applicable instructions. :contentReference[oaicite:8]{index=8}

Industrial Safety Applications

The GravityFlo SE-4300 can be considered for industrial and commercial environments where emergency eyewash access is required. Potential locations include manufacturing areas, workshops, construction sites, laboratories and other workplaces where hazardous substances may be present.

Speakman identifies GravityFlo emergency equipment for applications including construction, laboratory, retail, healthcare and industrial environments. :contentReference[oaicite:9]{index=9}

Construction Site Eyewash

The Speakman SE-4300 Portable Eyewash can be particularly useful in locations where permanent plumbing is not readily available. Construction sites can change frequently, making portable emergency equipment practical for temporary or changing work areas.

Speakman’s construction safety material highlights GravityFlo portable eyewash equipment for construction-site applications and emphasizes placing emergency eyewash equipment near hazardous locations. :contentReference[oaicite:10]{index=10}

ANSI/ISEA Z358.1 Compliance

The SE-4300 Eyewash is identified by Speakman as ANSI/ISEA Z358.1 certified. This standard establishes requirements for emergency eyewash and shower equipment, including performance and installation considerations. :contentReference[oaicite:11]{index=11}

Compliance of the equipment does not remove the need for correct installation, positioning, inspection, maintenance and workplace emergency procedures.

Portable Emergency Equipment

The Speakman GravityFlo Eyewash provides an alternative to permanently plumbed eyewash equipment in suitable locations. Its self-contained tank means the unit can operate independently of a continuous building water connection.

This portable configuration can be useful for work areas where plumbing infrastructure is unavailable or where the location of the hazard changes over time.

Tank Construction

The SE-4300 Portable Eyewash uses a high-density molded polyethylene tank. The tank is designed to hold the flushing fluid required for the unit’s gravity-fed operation.

The tank should be inspected regularly for damage, leakage or other conditions that could affect the equipment’s readiness.

Cleaning and Maintenance

Regular maintenance is important for the Speakman SE-4300 Portable Eyewash. The unit should be inspected according to the manufacturer’s instructions, with attention given to the tank, spray outlets, activation strap, hose connection and other components.

The SE-4300 includes a connection designed for draining and cleaning the unit. Proper cleaning and replenishment procedures should be followed to maintain the unit in an appropriate state of readiness. :contentReference[oaicite:12]{index=12}

Emergency Readiness

The Portable Emergency Eyewash should remain accessible and ready for use whenever hazardous materials are present in the associated work area. Equipment should not be blocked or used for storage purposes.

Workplace personnel should know the location of the eyewash and understand the emergency procedures applicable to chemical or particulate exposure.

Three-Year Limited Warranty

Speakman’s current product information lists a 3-year limited commercial warranty for the SE-4300. Warranty terms and conditions should be reviewed with the supplier or manufacturer before purchase. :contentReference[oaicite:13]{index=13}

Product Specifications

• Brand: Speakman
• Collection: GravityFlo
• Model: SE-4300
• Product type: Portable emergency eyewash
• Operation: Gravity-fed
• Tank capacity: 20 gallons
• Tank material: High-density molded polyethylene
• Activation: Elastomeric pull strap
• Flow rate: 0.4 GPM / approximately 1.51 L/min
• Flow duration: 15+ minutes
• Spray outlets: Molded plastic
• Nozzles: Self-cleaning
• Drench hose: Included
• Mounting: Shelf or wall mountable
• Wall bracket: Included
• Eyewash sign: Included
• Fill cap: Plastic with tamper prevention
• Connection: 3/4-inch GHT fitting for draining/cleaning and drench hose attachment
• Certification: ANSI/ISEA Z358.1
• Warranty: 3-year limited commercial warranty
• Country of origin: China

The above specifications are based on Speakman’s current product page and technical documentation for the SE-4300. :contentReference[oaicite:14]{index=14}

Why Choose Speakman SE-4300 Portable Eyewash?

Speakman SE-4300 Portable Eyewash combines a 20-gallon gravity-fed tank with hands-free pull-strap activation and an included drench hose. Its portable configuration makes it suitable for workplaces that need emergency eyewash access without depending on permanent plumbing.

With a documented 0.4 GPM flow rate, 15+ minute continuous operation and ANSI/ISEA Z358.1 certification, the SE-4300 provides a dedicated emergency eyewash solution for suitable workplace applications. :contentReference[oaicite:15]{index=15}

FAQs

What is the Speakman SE-4300 Portable Eyewash?
The Speakman SE-4300 is a gravity-fed portable emergency eyewash with a 20-gallon tank, pull-strap activation and an included drench hose.

How much water does the SE-4300 hold?
The SE-4300 has a 20-gallon tank.

Is the Speakman SE-4300 gravity-fed?
Yes. The GravityFlo SE-4300 uses gravity to deliver flushing fluid through the eyewash system.

Does the SE-4300 include a drench hose?
Yes. The SE-4300 includes a drench hose for additional spot body washing.

How is the Speakman SE-4300 activated?
The unit is activated by pulling its elastomeric pull strap, providing hands-free operation.

What is the flow rate of the SE-4300?
The documented flow rate is approximately 0.4 GPM, or about 1.51 litres per minute.

How long does the SE-4300 provide continuous flow?
Speakman specifies continuous flow for more than 15 minutes, exceeding the ANSI/ISEA Z358.1 required 15-minute period.

Is the Speakman SE-4300 ANSI/ISEA Z358.1 certified?
Yes. Speakman identifies the SE-4300 as ANSI/ISEA Z358.1 certified.

Can the SE-4300 be wall mounted?
Yes. The unit is designed to be shelf or wall mounted, and a wall mounting bracket is included.

What is the tank made from?
The SE-4300 uses a high-density molded polyethylene tank.

Can the SE-4300 be used for body washing?
The included drench hose is designed for spot body washing. It should not be considered a substitute for a full emergency safety shower where a complete-body shower is required.

Where can a Speakman GravityFlo SE-4300 be used?
It can be considered for suitable industrial, construction, laboratory, commercial and other workplaces where emergency eyewash access is required.

Does the SE-4300 require permanent plumbing?
No. Its gravity-fed portable design allows the unit to operate from its self-contained tank without a permanent plumbing connection.

Does the SE-4300 include an eyewash sign?
Yes. An integral eyewash sign is included.

Does the SE-4300 have self-cleaning nozzles?
Yes. Speakman’s current specifications identify self-cleaning nozzles as a feature of the SE-4300.

How should the SE-4300 be maintained?
The tank, spray outlets, activation mechanism, drench hose and other components should be inspected and maintained according to Speakman’s instructions.

Can the SE-4300 be used in a construction area?
Yes. Speakman specifically identifies GravityFlo portable eyewashes for construction-site applications.

Is the SE-4300 a full emergency shower?
No. It is a portable eyewash with an included drench hose for spot body washing. A dedicated emergency shower is required when full-body shower protection is needed.

What is the warranty on the Speakman SE-4300?
Speakman currently lists a 3-year limited commercial warranty for the product.